Odyssey Battery OMAX-25A-1B Ultimizer Charger

You looking to find the "Odyssey Battery OMAX-25A-1B Ultimizer Charger" Good news! You can purchase Odyssey Battery OMAX-25A-1B Ultimizer Charger with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $142.56    

Product Feature

• 12 Volt 25 Amps

Product Description

FINALLY, IT’S HERE! The Ultimizer™ range of 12V chargers has been custom designed to maximize the performance you can get from your ODYSSEY™ battery. These sophisticated chargers are powerful enough to quickly charge the battery and safe enough to leave them connected to your batteries indefinitely without damaging them.

Odyssey Battery OMAX-25A-1B Ultimizer Charger Review

After experiencing a failure with a Red top installed in my 62 Healey that sat idle over the winter ( battery disconnected) I relented and bought the Omax. I will use the trickle charge feature for that and the Yellow top in my Jeep snow plow.

Most of the consumer Reviews tell that the "Odyssey Battery OMAX-25A-1B Ultimizer Charger" are high quality item. You can read each testimony from consumers to find out cons and pros from Odyssey Battery OMAX-25A-1B Ultimizer Charger ...

Yakima 8002405 BigHorn 4-Bike Hitch Mount Rack

You looking to find the "Yakima 8002405 BigHorn 4-Bike Hitch Mount Rack" Good news! You can purchase Yakima 8002405 BigHorn 4-Bike Hitch Mount Rack with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $138.49 Too low to display   

Product Feature

• Switchblade anti-sway cradles prevent bike-to-bike contact
• Dual-arm design fits most bikes and eliminates the need for a tube adapter
• Available in either 2" or 1 1/4" receiver hitch (no adapter needed)
• Tilts away for rear of vehicle access
• Optional Deadlock available to lock bikes to rack and rack to car (Sold Seperatly)

Product Description

This affordable Big Horn 4 is designed for families and occasional riders who want to keep the amount they spend proportionate to the number of times they'll use their rack.

• 4-bike capacity
• Switchblade anti-sway cradles prevent bike-to-bike contact
• Dual-arm design fits most bikes and eliminates the need for a tube adapter
• Available in either 2" or 1 1/4" receiver hitch (no adapter needed)
• Tilts away for rear of vehicle access
• Optional Deadlock available to lock bikes to rack and rack to car (Sold Seperatly)

Item Specifications
Hitch Type	1-1/4" Receiver
Number of Bikes	4

- Product ships to US only

Yakima 8002405 BigHorn 4-Bike Hitch Mount Rack Review

We ride bikes several times per week. I say we meaning my me and my kids. So I carry 2-3 bikes on this several times per week. There are problems with heavy use. First of all, the pin that lets the rack fold down is 3/8 inch. Mine actually bent from running on the highway with 2-3 bikes. I drilled it out and put a 1/2 pin. Also, I didn't trust the threaded hitch pin that comes with the rack, it is also 3/8 inch and all that force is on the threads. If they break, by by rack. So I drilled it out to 1/2, used a regular class 2 1/2 pin and a product called a hich vise. $35 for the hitch vise, but the system works much better and is more stable. Finally, the sytem holds the bikes with flexible plastic pieces which slide on 1 1/4" metal poles. They hold the bikes well, but they also slide on the poles resulting in bikes ending up touching and rubbing paint off each other. Since I have no idea how anyone could fit four bikes on this rack, I went with mounts for three. You can remove a screw on the end of each pole, take the end cap off and slide off or on the pieces that hold the bikes on. I took one set off and then cut 1 1/4 inch PVC pipe to keep the other three sets equal distance from each other. This is dirt cheap and works extremely well, the bikes stay put on the poles and don't touch each other. Lots of modifications for this rack but it works well now. I think I would buy a more expensive one in the future but there aren't many choices if you need 1 1/4 and all I have ia a class 2 hitch so I can't use a 2 inch hitch.

Most of the consumer Reviews tell that the "Yakima 8002405 BigHorn 4-Bike Hitch Mount Rack" are high quality item. You can read each testimony from consumers to find out cons and pros from Yakima 8002405 BigHorn 4-Bike Hitch Mount Rack ...

Uniden Handheld TrunkTracker III Analog Police Scanner (BC346XT)

You looking to find the "Uniden Handheld TrunkTracker III Analog Police Scanner (BC346XT)" Good news! You can purchase Uniden Handheld TrunkTracker III Analog Police Scanner (BC346XT) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $214.99 $203.83   

Product Feature

• Handheld scanner for monitoring police and fire signals, weather transmissions, ham radio bands, and more
• Store 9,000 total conventional channels, trunked channels, and trunked system frequencies for quick recall
• TrunkTracker III Digital Scanning lets you monitor Motorola, EDACS and LTR systems in addition to conventional channels
• GPS Compatible so that the scanner can automatically select and scan nearby agencies
• Close Call RF Capture detects and tunes to nearby transmissions with no programming needed

Product Description

The Uniden BC346XT is a handheld scanner that's packed with features. Program up to 9,000 channels or 500 trunked systems in dynamic memory. GPS support gives you location-based scanning, location alerts, and crows-flight navigation with a compatible GPS unit. Fire Tone-Out Alerts you when fire pages are issued, Band Scope gives you a graphic representation of signal activity. Close Call RF Capture tunes to nearby signals with no programming needed, and so much more. Plus, PC programming and control makes setting up the scanner easier than ever.

Uniden Handheld TrunkTracker III Analog Police Scanner (BC346XT) Review

This is a great scanner, with very good specs, has a nice, small form-factor, and works reliably.

I concur with the positives in the other, previous reviews.

But I've got a couple of gripes, for which I knocked one star off the rating: (these are not deal-breakers, but just things to be aware of)

1. The included rechargeable batteries are just a bit too large in diameter for the battery cover to fit properly (the cover sort of "bulges" out). More of an annoyance at this point, but I'm concerned that it could possibly break eventually, requiring me to find a replacement cover. (Using AA batteries does not cause this problem, the cover fits just fine with them).

2. The arrangement and organization of the owner's manual is very poor in my view. It's not printed, which may surprise some buyers, personally I'd prefer it printed, but I understand the economics of releasing it only online/on included CD. But sorry, the manual is VERY POORLY arranged. I'm an experienced radio guy, just not with Uniden brand products. But I still am getting frustrated trying to find stuff. I would much prefer a PDF style manual, where typefaces, spacing, white space, etc. can be combined to communicate point much more effectively. Is this a big deal? Well probably not a deal-breaker, once you/I figure out how the various features work, we won't need the manual much, but it's a royal pain until then. You may have friends who can help you out on this, which may make this irritation not too big a deal for you.

3. This scanner does have a LOT OF CAPABILITY, including some really cool features, as a result, most keys have multiple functions, some (again, my personal opinion) are not as well thought out as I would prefer, ie not intuitive.

But overall, it's a good unit. My gripes are probably not deal-breakers, and keeping in mind the price, it's a worthwhile purchase. If you're experienced with Uniden products, you might not have any trouble at all figuring out how to use it, perhaps even not needing the manual, but if you're like me, just be prepared for a learning curve longer than you might otherwise expect.

Most of the consumer Reviews tell that the "Uniden Handheld TrunkTracker III Analog Police Scanner (BC346XT)" are high quality item. You can read each testimony from consumers to find out cons and pros from Uniden Handheld TrunkTracker III Analog Police Scanner (BC346XT) ...

Brand New 2007-2013 Jeep Wrangler JK 4 Door 3" Black Side Armor Step Nerf Bars Running Boards (Fit 4-Dr Only)

You looking to find the "Brand New 2007-2013 Jeep Wrangler JK 4 Door 3" Black Side Armor Step Nerf Bars Running Boards (Fit 4-Dr Only)" Good news! You can purchase Brand New 2007-2013 Jeep Wrangler JK 4 Door 3" Black Side Armor Step Nerf Bars Running Boards (Fit 4-Dr Only) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $200.00 $140.00   

Product Feature

• Please click the "See all vehicles" link below for fitment chart to make sure it fits your vehicle.
• 100% brand new 2 bars for both driver & passenger sides. All mounting hardware and DIY instruction included.
• Step bars are made of heavy duty Black Powder-Coated 3 inch round Galvanized mild steel tubing,rust resistant! UV resistant non-slip wide step pads.
• Easy Bolt-on installation. Must remove factory Running Boards for installation. (Please click the "See all vehicles" link below to make sure it fits your vehicle.)
• OE quality standard. 5-Year warranty

Product Description

Our OE-Quality standard parts give your Jeep an outstanding custom appearance covered by No-Hassle quality warranty!

Brand New 2007-2013 Jeep Wrangler JK 4 Door 3" Black Side Armor Step Nerf Bars Running Boards (Fit 4-Dr Only) Review

Easy install informed instructions and look great i dont know if i would call them armer they are more just running boards i think in actual rock climbing the brackets might get hung up more than just sliding over. But if your purpose is just for looks and a functioning step bar they are great buy and quality well made.

Most of the consumer Reviews tell that the "Brand New 2007-2013 Jeep Wrangler JK 4 Door 3" Black Side Armor Step Nerf Bars Running Boards (Fit 4-Dr Only)" are high quality item. You can read each testimony from consumers to find out cons and pros from Brand New 2007-2013 Jeep Wrangler JK 4 Door 3" Black Side Armor Step Nerf Bars Running Boards (Fit 4-Dr Only) ...

CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds

You looking to find the "CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds" Good news! You can purchase CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $149.47 $125.00   

Product Feature

• Universal 1/4-Inch hex bit holder with strong earth magnet
• 5 to 40-Inch pounds
• Offer versatility for applications that require more than one torque value
• Particularly suited for the electronics industry and for instrument assembly work
• Torque settings are easily and accurately changed with a unique adjusting knob and easy to read window scale

Product Description

CDI Torque Products 401SM 1/4" Torque Screwdriver 5-40 In Lb Micro-Adj

CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds Review

2nd Update: Jan 30, 2013

So far 2 of the 3 units purchased are working well. I had the 2 checked in my calibration lab and neither tool had a problem. I also recently purchased a 4th to replace the one that failed. I brought the review up to 4 stars because I still think this is a good product. My operators all love this tool and now prefer it over their previous driver. Currently the 3 drivers are only being used by one or two operators so they don't have the same use as the first that failed.

Update: August 27, 2012

Sadly, I had to decrease my rating from 5 stars to 3. It is still a good tool and my operators love it but if they only last 6 months it isn't worth it. I sent the first unit back to my calibration lab for a 6 month overhaul and the results were disappointing. They were not able to get the tool back into calibration. The low end was a little off, around 1 in lb below the setting. The upper limit was worse, around 48 in lbs when set to 40.

I had this particular tool being used 24 hours a day on all my shifts to check for this exact problem. The life span may be a little longer depending on your usage. The highest torque we have is around 36 in lbs.

After 3 months of use with the first article, and my calbration labs approval, I purchased two more that are currently being used in production. They have been in use for 2 months with no problems. Once those have gone through my calibration department for their 6 month overhaul, I will update this review.

(Original Review March 2012)

I purchased this torque driver to test along with others before getting sets for all my operators. So far I have been extremely pleased with the price, performance, and the feedback of my employees. We are using it on multiple torque specs between 10 and 36 in-lbs.

My calibration lab was very happy with the tool; both the low and high only had a 2% variation which is very low when compared with our other drivers. My seasoned operators (who usually do not like change) were very pleased with this design and how easy it is to adjust. I am now putting it through the test and having this one used through all our shifts checking longevity. Afterwards I will send it back through calibration and to double check variation and show there are no problems with adjusting torques. If I run into any problems I will update this review.

Most of the consumer Reviews tell that the "CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds" are high quality item. You can read each testimony from consumers to find out cons and pros from CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds ...

Honda Genuine Factory Gray Cargo Cover - 08Z07-TM8-110; 2010 to 2011 Insight

You looking to find the "Honda Genuine Factory Gray Cargo Cover - 08Z07-TM8-110; 2010 to 2011 Insight" Good news! You can purchase Honda Genuine Factory Gray Cargo Cover - 08Z07-TM8-110; 2010 to 2011 Insight with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $139.90 $139.75   

Product Feature

• Help to protect your belongings from damaging UV rays - and prying eyes - with the custom Cargo Cover!
• Color - Gray, color code NH-686L
• Genuine Honda Original Factory OEM Accessory

Product Description

Help to protect your belongings from damaging UV rays - and prying eyes - with the custom Cargo Cover. Color - Gray, color code NH-686L.

Honda Genuine Factory Gray Cargo Cover - 08Z07-TM8-110; 2010 to 2011 Insight Review

If you have a 2010 Insight, this is the cargo cover for you, and much cheaper than the dealer sells for. Fits perfect. Stows perfect. Perfect.

Most of the consumer Reviews tell that the "Honda Genuine Factory Gray Cargo Cover - 08Z07-TM8-110; 2010 to 2011 Insight" are high quality item. You can read each testimony from consumers to find out cons and pros from Honda Genuine Factory Gray Cargo Cover - 08Z07-TM8-110; 2010 to 2011 Insight ...