CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds

You looking to find the "CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds" Good news! You can purchase CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $149.47 $125.00   

Product Feature

• Universal 1/4-Inch hex bit holder with strong earth magnet
• 5 to 40-Inch pounds
• Offer versatility for applications that require more than one torque value
• Particularly suited for the electronics industry and for instrument assembly work
• Torque settings are easily and accurately changed with a unique adjusting knob and easy to read window scale

Product Description

CDI Torque Products 401SM 1/4" Torque Screwdriver 5-40 In Lb Micro-Adj

CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds Review

2nd Update: Jan 30, 2013

So far 2 of the 3 units purchased are working well. I had the 2 checked in my calibration lab and neither tool had a problem. I also recently purchased a 4th to replace the one that failed. I brought the review up to 4 stars because I still think this is a good product. My operators all love this tool and now prefer it over their previous driver. Currently the 3 drivers are only being used by one or two operators so they don't have the same use as the first that failed.

Update: August 27, 2012

Sadly, I had to decrease my rating from 5 stars to 3. It is still a good tool and my operators love it but if they only last 6 months it isn't worth it. I sent the first unit back to my calibration lab for a 6 month overhaul and the results were disappointing. They were not able to get the tool back into calibration. The low end was a little off, around 1 in lb below the setting. The upper limit was worse, around 48 in lbs when set to 40.

I had this particular tool being used 24 hours a day on all my shifts to check for this exact problem. The life span may be a little longer depending on your usage. The highest torque we have is around 36 in lbs.

After 3 months of use with the first article, and my calbration labs approval, I purchased two more that are currently being used in production. They have been in use for 2 months with no problems. Once those have gone through my calibration department for their 6 month overhaul, I will update this review.

(Original Review March 2012)

I purchased this torque driver to test along with others before getting sets for all my operators. So far I have been extremely pleased with the price, performance, and the feedback of my employees. We are using it on multiple torque specs between 10 and 36 in-lbs.

My calibration lab was very happy with the tool; both the low and high only had a 2% variation which is very low when compared with our other drivers. My seasoned operators (who usually do not like change) were very pleased with this design and how easy it is to adjust. I am now putting it through the test and having this one used through all our shifts checking longevity. Afterwards I will send it back through calibration and to double check variation and show there are no problems with adjusting torques. If I run into any problems I will update this review.

Most of the consumer Reviews tell that the "CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds" are high quality item. You can read each testimony from consumers to find out cons and pros from CDI Torque 401SM Micro Adjustable Torque Screwdriver, Torque Range 5 to 40-Inch Pounds ...