WARN 78100 ProVantage Plow Base/Push Tube Assembly

You looking to find the "WARN 78100 ProVantage Plow Base/Push Tube Assembly" Good news! You can purchase WARN 78100 ProVantage Plow Base/Push Tube Assembly with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $142.07 Too low to display   

Product Feature

• Use on your ATV with a WARN ProVantage plow systems
• Outstanding durability with excellent impact resistance
• An extra wide design for increased stability
• Forward trip system and an interlocked rotating base plate

Product Description

The WARN Plow Base assembly features an extra wide design for increased stability and durability, a forward trip system, and an interlocked rotating base plate for great strength, outstanding durability, and excellent impact resistance. For use with the WARN ProVantage plow system with a center mounting kit only.

WARN 78100 ProVantage Plow Base/Push Tube Assembly Review

I purchased this plow system for my honda 2003 Honda 350 rancher. Decided on the WARN after many hours of research.

It's a 3 part system all purchased seperately:

With the Push Bar/plow base 78100

In case you looking for the entire kit I also purchased:
1) mounting plate WARN 63290
2) 50" blade WARN 78950

The Push tubes were very easy to attach. Drive the atv on top of the push tubes to where the mounting plate is aligned with holes on the push tube. I use a short piece of 2x4 to lift it in place, then clip to the plate. Hook up the winch and ready to go. Very satisified with this purchase and can see years of work with this setup.

It's also not too heavy for my 350 rancher and handles well in the steep hills and rough surfaces in Colorado and the right/left pivoting options are perfect for my S-like driveway.

It arrived at the same time as the plow blade. The instructions that were included for the Push Tube were very limited and made me think this was going to be a guessing game, and I usually like the challenge.
I decided to open the plow box instead. The detailed installation instructions came with the plow blade. After studying the schematics and some light reading I was able to install the system without problems in less than 2 hours. I finger tightened everything into place first and mounted the springs, then tightened everything up with a impact wrench. My tool selection isn't the largest, but I needed to use a 15/16 end wrench (or a socket) and a crescent wrench for the 2 large mounting bolts.

Happy plowing...

Most of the consumer Reviews tell that the "WARN 78100 ProVantage Plow Base/Push Tube Assembly" are high quality item. You can read each testimony from consumers to find out cons and pros from WARN 78100 ProVantage Plow Base/Push Tube Assembly ...