JVC KW-HDR81BT Double-DIN Car CD receiver with Bluetooth, HD Radio, iPod Capable

You looking to find the "JVC KW-HDR81BT Double-DIN Car CD receiver with Bluetooth, HD Radio, iPod Capable" Good news! You can purchase JVC KW-HDR81BT Double-DIN Car CD receiver with Bluetooth, HD Radio, iPod Capable with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $173.86 Too low to display   

Product Feature

• Playback of CD, CD-R, CD-RW, MP3, WAV and WMA
• AM/FM tuner with 18FM/6AM presets
• Electronic Shock Protection (ESP)
• 3-band parametric equalizer with 6 selectable tone curves (5 Preset, 1 User)
• 24-bit Digital Analog Converter (DAC) to enhance your MP3/WMA playback

Product Description

It's time to upgrade your driving experiences. Here's an affordable car stereo that offers a package to entertain your behind-the-wheel times with better sounds to keep you focused on the road. JVC's KW-HDR81BT CD receiver features a built-in HD Radio tuner that offers reception like you've never heard before. Stations broadcasting an HD Radio signal come in crystal clear, as FM sounds as clean and defined as a CD, while AM steps up to traditional FM quality. With ports for smartphones and Bluetooth speakerphone for pairing with most phones, you're set to go. The road is clear and so is your music and communication. Connect with the JVC KW-HDR81BT Double-DIN Car CD receiver as your vehicle enhancer. You're invited to upgrade your time for travel at a price that makes it really make sense.

Low Pass and High Pass crossover filter control Separate subwoofer level control 3 Sets of 2.5V preamp outputs (front, rear and subwoofer) SIRIUS or XM Satellite Radio Ready - SIRIUS Radio Package or XM Radio Package and subscription required and sold separately Bluetooth technology supports hands-free calling with a compatible Bluetooth phone Ready for your iOS device - iPod and iPhone Ready - Standard USB-to-iPod Cable compatible Front Auxiliary Input - 3.5mm headphone jack allows connection to portable media devices such as MP3 players Front and Rear USB Inputs - USB port allows connection to digital devices such as flash drives, portable media players, etc. Bluetooth version 2.1 +EDR certified Bluetooth range up to 32.8 ft. Supports A2DP audio streaming Includes an external wired microphone for clear, distortion-free talking Wireless remote control included CD text information display 12 or 24 hours digital clock display MP3 ID3 Tag Display (Title/Artist/Album) Requires 2-DIN Installation

JVC KW-HDR81BT Double-DIN Car CD receiver with Bluetooth, HD Radio, iPod Capable Review

I installed this JVC KWHDR81BT in my SUV two months ago and have been very pleased with this stereo system. I cannot speak about installation because I had the unit professionally installed into my vehicle nor can I critique power output because I also added a 75 watt X 4 power amplifier to drive my aftermarket speakers. After some basic research I determined JVC was offering the features/options I wanted (to try) in a new headunit for a decent price:
- Built-in HD Radio
- Bluetooth
- front USB port
- playback of CDs, CD-Rs, and CD-RW loaded with MP3 and WMA files
- external microphone included
Neutral:
I did not care about the multicolor display but figured it would be able to "blend" in with my gold-toned interior dash lighting; which it does almost perfectly! The combination of this JVC, an amp and component speakers reminds me that I've yet to hear a factory stereo system that can touch aftermarket ... but since sound and tones can be subjective, I'll just say I'm very happy to listen to my tunes as I drive down the road!!
Pros:
As for the unit's operation; the HD radio works great, but I know this of course depends on your vehicles antenna and/or distance to a signal. During a recent trip to NYC the unit had no problems picking through the various HD stations. But there are times when I drive under certain powerlines that the radio "jumps" in and out of HD and it makes the volume fade up and down; yup, it's annoying but adjusting the radio reception modes when you're driving is not easy nor smart. But then again, this unit does give you access to other music source options at the touch of a finger. The Bluetooth is incredible and it's the feature I like the most, took me all of less than a minute without reading the manual to sync my Iphone! For calls, the microphone was installed at the top of my A-pillar and could not be happier (or safer) with the hands-free calling; I'm heard and hear conversations clearly regardless of my windows being up or down. I was using the front USB to connect wired to my iPhone but soon changed to plugging in a SanDisk Cruzer Fit 16 GB Flash Drive SDCZ33-016G I bought from Amazon loaded with 10+ GB of other music in folders I don't keep on my iPhone. I've read complaints how slow loading from a "drive" is with this unit via the USB; all I can say is I'm okay with 10-20 seconds of lag time. The Bluetooth allows me to stream off my iPhone with clarity that is no different from being wired except this option does not charge your device.
Cons:
The display can be drowned out by bright sunlight through the open sunroof at certain times of the day; only happens for prolong periods when traveling East/West with the sun's path. Hardest thing is using and getting accustomed to the unit's buttons and scrolling menus. Not simple, but I'm getting faster longer I own it.
Overall:
I have no reservations buying another JVC KWHDR81BT for my next new vehicle if it's still available!!

Most of the consumer Reviews tell that the "JVC KW-HDR81BT Double-DIN Car CD receiver with Bluetooth, HD Radio, iPod Capable" are high quality item. You can read each testimony from consumers to find out cons and pros from JVC KW-HDR81BT Double-DIN Car CD receiver with Bluetooth, HD Radio, iPod Capable ...

GTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter

You looking to find the "GTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter" Good news! You can purchase GTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $143.82    

Product Feature

• AC/DC current measurement from 0.001 up to 100 A. which makes it a great tool for measuring parasitic draws and AC/DC voltage measurement up to 600 volt
• Small jaw: 1.2 inches (W) x 0.53 inches (D) (300x13.4millimeters) with clamp opening up to 1/2 inch (12.5 millimeters)
• Peak and Data hold functions with one rotary switch operation
• 2 readings per second sampling and continuity check with audible indicator
• Test leads soft carrying deluxe pouch and batteries included

Product Description

GTC 1 mA to 100 Amps AC/DC low current clamp meter is designed to accurately measure current, current leaks (parasitic draws down to 1mA) and electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC. The small diameter ( inch or 13mm) and narrow jaw makes it ideal for use in confined spaces and on small gauge wires. Other features include resistance measurement functions, audible continuity test, display hold and peak detector.

GTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter Review

Be very careful when purchasing a milliamp-rated DC clamp meter. This one works like a charm. It's as stable as a rock and truly can measure down to a milliamp on the DC side. It's easy to use, well designed, and the company is great to deal with if you have any questions. I highly recommend this meter to anyone needing milliamp measurement. This meter is a complete contrast to lookalike meters sold all over the web that are missing the design elements that make this meter function so well

Most of the consumer Reviews tell that the "GTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter" are high quality item. You can read each testimony from consumers to find out cons and pros from GTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter ...

Thule 571 Roof Mount Cargo Box Storage Lift

You looking to find the "Thule 571 Roof Mount Cargo Box Storage Lift" Good news! You can purchase Thule 571 Roof Mount Cargo Box Storage Lift with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $152.95    

Product Feature

• Designed for cargo box removal and storage in garages and workshops
• Supports up to 220-lbs (100kg) when installed correctly
• One-person use with crank system, lifting cargo boxes on and off vehicles
• Mounts quickly and easily to ceiling studs or rafters
• Also great for canoes, kayaks, surfboards, sailboards, ladders, etc.

Product Description

The Thule 571 Cargo Box Storage Lift is a simple, yet ideal solution for storing cargo roof boxes on the ceiling of your garage or workshop when not in use on your vehicle. Designed around a combined worm gear drive, roller, rope and crank mechanism, it allows you to raise and lower any sized cargo box right into place. The Thule 571 cargo box storage lift is rated to support up to 220-Pounds when installed correctly and in addition to cargo boxes, can be used to store everything from canoes, kayaks, sailboards, to ladders etc.

Thule 571 Roof Mount Cargo Box Storage Lift Review

Excellent product. Does what it says and functions very nicely. Good quality, but you do have to get some of your own parts to make this thing happen. I have posted 5 pictures of the actual product in use. I used a lot of the helpful hints others have given and summarized below. Also unlike many of the others that have posted, my garage has studs that are 24" on center instead of 16". Therefore, I have used 2x4s cut to 5feet to allow placement into 3 of the studs spread out to 48" with 6" overlap on each side. I used 2 lag screws in the center and 1 lag screw near each end of the 2x4. The center rod is mounted at a distance of 47 1/4 inches (or 1200mm). If you cut at 48 inches, you may have little room to spare. Plus most lumber stores will sell 2x4s at 10 feet long. Just buy two of them and cut them in half. You can probably hit the studs mounted directly to the ceiling, but I you may have to use drywall anchors with the method also. If you have a garage door opener, look up and see where the screw are at mounting this. This will give you a good idea where a stud is and also gives you a good idea where the center of the garage stall is. I mounted my first 2x4 about 27 inches past the front of my garage door opener. I did the math on my Thule box and it suggested to make the length between your back 2x4 and your front 2x4 equal to 1/2 the length of your car box. I would suggest making this length equal to the length that your carbox attaches to your car. Measure the length between the graspers on your car box and spread the front and back 2x4s out to this distance. This should allow you to hang the rope straight down and catch the graspers on the box. This way, the box won't slide anywhere. Mine works fine, but probably should have spread my 2x4s out by another 3-4 inches.

Add'l parts suggested.
2x4" x 10 feet, buy 2 of the them, cut in half to make 4.
3 1/2" long 1/4 inch thick lag screw. I used 4 on each 2x4, but bought 20.
1/4 inch washers, buy as many as you have lag screws
Use 3/16 drill bit for pilot hole.
#8 wood screws ( I used #8 2 inch deck screw because they tap a lot easier), will need 6 screws
#14 2 1/2 inch wood screws, will need 8 total.
9/64 drill bit for pilot hole.
Longer 3/16 rope. I don't know if this is necessary with 10 foot ceilings. I got a 50 footer and probably cut off 15 feet.
3/8 inch foam pipe insulation, get the solid foam without the slit lengthwise down the insulation.
Stud sensor

1. Start by cutting your 2x4 into half or 5 foot each.
2. If you have a center stud in the center of your garage where you opener is, mark the center on the 2x4 and drill 2 pilot holes with the 3/16 bit. Leave the pilot hole at least 1 inch from the edge of the wood.
3. Measure a good distance away from your opener to give you enough room to suspend your carbox. Mine was 27 inches from the opener.
4. Find the center stud with the stud finder. Mark it.
5. Suspend the 2x4 up to the ceiling and roughly square this with your garage. Use one of the pilot holes and drill up into the ceiling studs.
6. Use one of the 3 1/2 inch 1/4 inch lag screws with a 1/4 inch washer and secure the 2x4 up to the ceiling. Not too tight yet. Tap the stud into the correct position squaring it with the garage. Use the second pilot hole and drill the pilot into the ceiling, followed by the lag screw.
7. Go to each side of the 2x4 now and drill one pilot hole into the stud by using a stud finder.
8. Measure the distance between the rail graspers on your car box. Position the second 2x4 this distance away from the first 2x4.
9. Hang the second 2x4 in a similar fashion to the first making sure to keep it square to the first.
10. With the 2 front and rear 2x4s in place, you can then hang the pulleys.
11. The pulleys cannot be spread out any farther than just over 39 inches. My Thule box was about 38 inches wide. I spread the pulleys out to 19 inches from the center of each 2x4. Use a square to make sure you are putting the pilot holes square on the 2x4. Use the 9/64 drill bit for the pilot holes. Use the #14 2 1/2 inch wood screws for this, no washer needed.
12. Once all the pulleys are on, secure the middle 2x4. This should be evenly spaced between the rear and front 2x4s.
13. Secure the 2x4 in a similar fashion as the other 2. You may have to use a countersink into the 2x4 to get the lag screws flush with the face of the 2x4. This is only important on the middle 2x4. The anchor brackets that attach to the wind up bar needs to be spaced out to 47 1/4 inches which comes pretty close to where I had my lag screws. I ended up being able to flip the direction of the middle and end anchor brackets so that they didn't hit up against any of my lag screws. The first anchor bracket has to be facing a certain direction, but the other two can be facing either direction.
14. Attach both the end anchor brackets to the middle 2x4 with #8 2 inch deck screws, no washer. No pilot needed. These need to be mounted at 23 5/8 off center on each side. They should be symmetric on each side, but I moved mine about 1/4 inch to allow it to fit just inside my lag screw head. I then put the other outer one 47 1/4 inches away.
15. Look at the picture and assemble the rod with the coil wheels installed. My rod already had one pin in it already. Slide the rod in place. Don't forget to insert the middle anchor bracket.
16. Bend the cotter pins to hold the rod in place. Secure the middle bracket to the 2x4 with a couple more deck screws. I had a good 2 inches of extra rod exiting the far bracket.
17. Thread the rope through the pulleys and wheels.
18. I used 3/8 inch foam insulation around the rope as others suggested. Buy the stuff that isn't slit lengthwise and feed the rope through it.
19. Figure out how high you would like your carbox when fully down. Mine sits nicely at 48 inches from the ground with a 10 foot ceiling. Cut the rope and tie a good knot. Run your insulation over the knot.
20. Hang your carbox. Level your system by pulling rope through the coil wheels in the middle.
21. Crank it up. I likely will also find some way to use a cordless drill on the pulley system. Takes less than 1 minutes to lift and release the unit. I did not use any PVC pipe to make the middle rod thicker and therefore less turns to lift and drop the unit.

It's a good project, but seems like a spent a few hours working through some of the details. If I did another, probably only looking at about 45 minutes.

Most of the consumer Reviews tell that the "Thule 571 Roof Mount Cargo Box Storage Lift" are high quality item. You can read each testimony from consumers to find out cons and pros from Thule 571 Roof Mount Cargo Box Storage Lift ...

Kenwood CMOS-210 Universal Rear View Camera

You looking to find the "Kenwood CMOS-210 Universal Rear View Camera" Good news! You can purchase Kenwood CMOS-210 Universal Rear View Camera with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $143.87 $142.00   

Product Feature

• Kenwood Rear View Camera

Product Description

Kenwood Rear View Camera

Kenwood CMOS-210 Universal Rear View Camera Review

This camera is fantastic and a great value. I have several cars with cameras and this camera is the best by far. It does have the back-up guide lines, you just have to turn them on in the programming and pick which type you want. It is all there in the instructions.

Most of the consumer Reviews tell that the "Kenwood CMOS-210 Universal Rear View Camera" are high quality item. You can read each testimony from consumers to find out cons and pros from Kenwood CMOS-210 Universal Rear View Camera ...

E-PRANCE Shadow GT550W Car DVR Recorder With Advanced WDR + Tiotech A8 + FULL HD 1080P 30FPS + G-Sensor + Night Vision + 160 Degree + Car Plate Stamp w/ 4GB Memory Card

You looking to find the "E-PRANCE Shadow GT550W Car DVR Recorder With Advanced WDR + Tiotech A8 + FULL HD 1080P 30FPS + G-Sensor + Night Vision + 160 Degree + Car Plate Stamp w/ 4GB Memory Card" Good news! You can purchase E-PRANCE Shadow GT550W Car DVR Recorder With Advanced WDR + Tiotech A8 + FULL HD 1080P 30FPS + G-Sensor + Night Vision + 160 Degree + Car Plate Stamp w/ 4GB Memory Card with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $149.99 $126.40   

Product Feature

• FULL HD 1920*1080P 30FPS & 2.7" TFT Screen get the clearest picture
• CPU: Tiotech A8 is one of the best processing chip for car dvr
• Ultra Wide Angle 160 degree it records even the front runner vehicle and both sides of the road
• Advanced WDR; F1.6 Big Aperture Super Low Light Performance could have supper LED Night Vision
• Other Function: Car Plate Stamp, G-sensor,Motion detection,Loop Recorder,SOS,LED Night Vision

Product Description

General Specs
Model: GT550W
Processor: Tiotech A8
Image Sensor: 1/3" Mega Pixels Sensor
Lens: F1.6 Big Aperture Super Low Light Performance
Ultra Wide Angle 160 Degree
Video Resolution: 1920*1080P 30FPS, 1280*720P 60FPS, 1280*720P 30FPS
Video Format: MOV
Video Codec : MPEG-4 / H.264
Image Resolution: 2592 x 1944, 4032 x 3024, 3648 x 2736, 3264 x 2448, 2592 x 1944
Language: English, Spanish, Deutsch, Japanese, Russian, Chinese
Screen Size: 2.7 Inch TFT Screen
Card Slot: Micro SD Card
Maximum Card Memory: Up to 32GB (not Including)

Additional Features:
Motion Detection: Yes
GPS logger: N/A
G-Sensor: Yes
Loop Recording: Yes
Car Plate Stamp: Yes
Night Vision: LED
HDMI Output: Yes
TV Out: Yes
SOS: Yes
Port :1 x USB Port, 1 x TF Card Slot, 1 x HDMI, 1 x AV Out
Battery Type: Built in 3.7V 500mAh Battery
Voltage: DC12-24V
Dimensions: 11.5*4.8*3.5

What's in the box
1 x Car Dvr
1 x USB Cable
1 x Car Charger
1 x Bracket
1 x HDMI Cable
1 x User Manual

E-PRANCE Shadow GT550W Car DVR Recorder With Advanced WDR + Tiotech A8 + FULL HD 1080P 30FPS + G-Sensor + Night Vision + 160 Degree + Car Plate Stamp w/ 4GB Memory Card Review

First off, I bought this dash cam from E-prance on Ebay. They do sell it there as well. That being said, this is the second dash cam that I've purchased, the first being the Q7 dash cam I got from Amazon. This cam is excellent and well worth the extra money spent on it. The video quality is excellent - clear, crisp, colors are accurate, and it is well built. It is a bit larger than other dash cams out there but I was willing to trade bigger size for better video quality. The mount is sturdy, and the package even comes with an HDMI cable.
As far as video options, just read the description. I shoot in 720p @30FPS and it's plenty for what I need. It retains the quality and is not a crop of the center of the sensor like some other dash cams tend to do. The movies are in MOV format and it's easy to connect it up to the computer as a removable device if you'd like to use the provided microUSB to USB connector. My MAC recognized it and mounted it as a removable drive without problems. I tend to just remove the microSD card directly out of the cam and use the provided adapter to plug it into my computer for download.
I've tested this camera with a Sandisk 32gb Class 10 microSD card and it performs flawlessly. No stuttering of video whatsoever. I've yet to see any real heat issues with this cam either. It gets warm but not hot. I've not seen any blurring of the video when the camera warms up, something that was a problem with its predecessors.
The most important thing that made me keep this camera, unlike the previous purchase, is that the video is crisp, clear, and I can read license plates should I need to. The lens is of high quality and there is no blurring at the edges. It has a low F-stop lens making it ideal for filming in low light.
Finally, the audio quality is pretty good. I could hear raindrops on the windshield, conversations in the car, and even the engine revving. The audio can be turned off if you don't want it.
I highly recommend this dash cam. I did not need GPS nor speed info on my recordings for obvious reasons. You won't be disappointed.
If you want to see sample videos of what this cam can do, search "shadow gt550w" in YouTube and you'll see plenty of great video samples of what this cam can record.

Most of the consumer Reviews tell that the "E-PRANCE Shadow GT550W Car DVR Recorder With Advanced WDR + Tiotech A8 + FULL HD 1080P 30FPS + G-Sensor + Night Vision + 160 Degree + Car Plate Stamp w/ 4GB Memory Card" are high quality item. You can read each testimony from consumers to find out cons and pros from E-PRANCE Shadow GT550W Car DVR Recorder With Advanced WDR + Tiotech A8 + FULL HD 1080P 30FPS + G-Sensor + Night Vision + 160 Degree + Car Plate Stamp w/ 4GB Memory Card ...