ISC Helicopter-OG-HD Surface Guard Tape: 8 in. x 30 ft. (Transparent)

You looking to find the "ISC Helicopter-OG-HD Surface Guard Tape: 8 in. x 30 ft. (Transparent)" Good news! You can purchase ISC Helicopter-OG-HD Surface Guard Tape: 8 in. x 30 ft. (Transparent) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $145.00    

Product Feature

• Core: 3" diameter
• Backing/Carrier: polyurethane film
• Adhesive: acrylic
• Release Liner: 92 lb. polycoated white liner
• Thickness: 19.2 mils (carrier, adhesive, liner) 14.5 mils (carrier, adhesive) 12 mils (carrier)

Product Description

ISC Helicopter-OG-HD Heavy Duty Surface Guard Tape (14 mil Outdoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter/leading edge wing tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or an outdoor grade. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun light, it may yellow over time. Outdoor grade provides excellent protection against ultra violet light, temperature extremes and automotive solvents. Outdoor grade will not yellow over time. The tape is clear/transparent and is supplied on a white paper release liner. Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will. Applications for the surface protection tape are endless and include: bicycle frames, skis, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges. Also used to protect bar code labels under extreme conditions like at ski resorts. Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job. Super tough film requires razor knife or scissors for cutting. Supplied on 92 lb. easy release polycoated liner. Requires no heat or solvent to activate. This product was mentioned in the October 2008 issue of Motorcycle Consumer News (page 48 Product Report).

ISC Helicopter-OG-HD Surface Guard Tape: 8 in. x 30 ft. (Transparent) Review

purchased to use on personal as well as rental sups.... this is the way to go if you need enough tape for multiple boards. same tape in the shops retails for 40 bucks for enough to do 1 board. this roll of tape will be enough to tape 5 surf/sups saving be alot of money. the tape i purchased was the thicker model which provides more protection for the board but is a little harder to install (does not stretch around the rail as easy as the thin model. tryed the thinner mode that most shops sell and it is easily cut by the paddle. good stuff A+++

Most of the consumer Reviews tell that the "ISC Helicopter-OG-HD Surface Guard Tape: 8 in. x 30 ft. (Transparent)" are high quality item. You can read each testimony from consumers to find out cons and pros from ISC Helicopter-OG-HD Surface Guard Tape: 8 in. x 30 ft. (Transparent) ...